Volume 14, Issue 1
Interacting Stress Intensity Factors of Multiple Elliptical-Holes and Cracks Under Far-Field and Arbitrary Surface Stresses

Adv. Appl. Math. Mech., 14 (2022), pp. 125-154.

Published online: 2021-11

Preview Full PDF 116 4215
Export citation

Cited by

• Abstract

Calculating interacting stress intensity factors (SIFs) of multiple elliptical-holes and cracks is very important for safety assessment, stop-hole optimization design and resource exploitation production in underground rock engineering, e.g., buried tunnels, deep mining, geothermal and shale oil/gas exploitation by hydraulic fracturing technology, where both geo-stresses and surface stresses are applied on buried tunnels, horizontal wells and natural cracks. However, current literatures are focused mainly on study of interacting SIFs of multiple elliptical-holes (or circular-holes) and cracks only under far-field stresses without consideration of arbitrary surface stresses. Recently, our group has proposed a new integral method to calculate interacting SIFs of multiple circular-holes and cracks subjected to far-filed and surface stresses. This new method will be developed to study the problem of multiple elliptical-hole and cracks subjected to both far-field and surface stresses. In this study, based on Cauchy integral theorem, the exact fundamental stress solutions of single elliptical-hole under arbitrarily concentrated surface normal and shear forces are derived to establish new integral equation formulations for calculating interacting SIFs of multiple elliptical-holes and cracks under both far-field and arbitrary surface stresses. The new method is proved to be valid by comparing our results of interacting SIFs with those obtained by Green's function method, displacement discontinuity method, singular integral equation method, pseudo-dislocations method and finite element method. Computational examples of one elliptical-hole and one crack in an infinite elastic body are given to analyze influence of loads and geometries on interacting SIFs. Research results show that when $\sigma_{x x}^{\infty} \geq \sigma_{y y}^{\infty}$, there appears a neutral crack orientation angle $\beta_0$ (without elliptical-hole's effect). Increasing $\sigma_{x x}^{\infty} / \sigma_{y y}^{\infty}$  and $b/a$ (close to circular-hole) usually decreases $\beta_0$ of $K_I$ and benefits to the layout of stop-holes. The surface compressive stresses applied onto elliptical-hole $(n)$ and crack $(p)$ have significant influence on interacting SIFs but almost no on $\beta_0$. Increasing $n$ and $p$ usually results in increase of interacting SIFs and facilitates crack propagation and fracture networks. The elliptical-hole orientation angle $(\alpha)$ and holed-cracked distance $(t)$ have great influence on the interacting SIFs while have little effect on $\beta_0$. The present method is not only simple (without any singular parts), high-accurate (due to exact fundamental stress solutions) and wider applicable (under far-field stresses and arbitrarily distributed surface stress) than the common methods, but also has the potential for the anisotropic problem involving multiple holes and cracks.

• Keywords

Interacting stress intensity factors, multiple elliptical-holes and cracks, far-field stresses, arbitrary surface stresses, integral equation method.

74A10, 78B05

• BibTex
• RIS
• TXT
@Article{AAMM-14-125, author = {Yi , Wei and Rao , Qiuhua and Zhu , Wei and Shen , Qingqing and Li , Zhuo and Ma , Wenbo}, title = {Interacting Stress Intensity Factors of Multiple Elliptical-Holes and Cracks Under Far-Field and Arbitrary Surface Stresses}, journal = {Advances in Applied Mathematics and Mechanics}, year = {2021}, volume = {14}, number = {1}, pages = {125--154}, abstract = {

Calculating interacting stress intensity factors (SIFs) of multiple elliptical-holes and cracks is very important for safety assessment, stop-hole optimization design and resource exploitation production in underground rock engineering, e.g., buried tunnels, deep mining, geothermal and shale oil/gas exploitation by hydraulic fracturing technology, where both geo-stresses and surface stresses are applied on buried tunnels, horizontal wells and natural cracks. However, current literatures are focused mainly on study of interacting SIFs of multiple elliptical-holes (or circular-holes) and cracks only under far-field stresses without consideration of arbitrary surface stresses. Recently, our group has proposed a new integral method to calculate interacting SIFs of multiple circular-holes and cracks subjected to far-filed and surface stresses. This new method will be developed to study the problem of multiple elliptical-hole and cracks subjected to both far-field and surface stresses. In this study, based on Cauchy integral theorem, the exact fundamental stress solutions of single elliptical-hole under arbitrarily concentrated surface normal and shear forces are derived to establish new integral equation formulations for calculating interacting SIFs of multiple elliptical-holes and cracks under both far-field and arbitrary surface stresses. The new method is proved to be valid by comparing our results of interacting SIFs with those obtained by Green's function method, displacement discontinuity method, singular integral equation method, pseudo-dislocations method and finite element method. Computational examples of one elliptical-hole and one crack in an infinite elastic body are given to analyze influence of loads and geometries on interacting SIFs. Research results show that when $\sigma_{x x}^{\infty} \geq \sigma_{y y}^{\infty}$, there appears a neutral crack orientation angle $\beta_0$ (without elliptical-hole's effect). Increasing $\sigma_{x x}^{\infty} / \sigma_{y y}^{\infty}$  and $b/a$ (close to circular-hole) usually decreases $\beta_0$ of $K_I$ and benefits to the layout of stop-holes. The surface compressive stresses applied onto elliptical-hole $(n)$ and crack $(p)$ have significant influence on interacting SIFs but almost no on $\beta_0$. Increasing $n$ and $p$ usually results in increase of interacting SIFs and facilitates crack propagation and fracture networks. The elliptical-hole orientation angle $(\alpha)$ and holed-cracked distance $(t)$ have great influence on the interacting SIFs while have little effect on $\beta_0$. The present method is not only simple (without any singular parts), high-accurate (due to exact fundamental stress solutions) and wider applicable (under far-field stresses and arbitrarily distributed surface stress) than the common methods, but also has the potential for the anisotropic problem involving multiple holes and cracks.

}, issn = {2075-1354}, doi = {https://doi.org/10.4208/aamm.OA-2021-0057}, url = {http://global-sci.org/intro/article_detail/aamm/19979.html} }
TY - JOUR T1 - Interacting Stress Intensity Factors of Multiple Elliptical-Holes and Cracks Under Far-Field and Arbitrary Surface Stresses AU - Yi , Wei AU - Rao , Qiuhua AU - Zhu , Wei AU - Shen , Qingqing AU - Li , Zhuo AU - Ma , Wenbo JO - Advances in Applied Mathematics and Mechanics VL - 1 SP - 125 EP - 154 PY - 2021 DA - 2021/11 SN - 14 DO - http://doi.org/10.4208/aamm.OA-2021-0057 UR - https://global-sci.org/intro/article_detail/aamm/19979.html KW - Interacting stress intensity factors, multiple elliptical-holes and cracks, far-field stresses, arbitrary surface stresses, integral equation method. AB -

Calculating interacting stress intensity factors (SIFs) of multiple elliptical-holes and cracks is very important for safety assessment, stop-hole optimization design and resource exploitation production in underground rock engineering, e.g., buried tunnels, deep mining, geothermal and shale oil/gas exploitation by hydraulic fracturing technology, where both geo-stresses and surface stresses are applied on buried tunnels, horizontal wells and natural cracks. However, current literatures are focused mainly on study of interacting SIFs of multiple elliptical-holes (or circular-holes) and cracks only under far-field stresses without consideration of arbitrary surface stresses. Recently, our group has proposed a new integral method to calculate interacting SIFs of multiple circular-holes and cracks subjected to far-filed and surface stresses. This new method will be developed to study the problem of multiple elliptical-hole and cracks subjected to both far-field and surface stresses. In this study, based on Cauchy integral theorem, the exact fundamental stress solutions of single elliptical-hole under arbitrarily concentrated surface normal and shear forces are derived to establish new integral equation formulations for calculating interacting SIFs of multiple elliptical-holes and cracks under both far-field and arbitrary surface stresses. The new method is proved to be valid by comparing our results of interacting SIFs with those obtained by Green's function method, displacement discontinuity method, singular integral equation method, pseudo-dislocations method and finite element method. Computational examples of one elliptical-hole and one crack in an infinite elastic body are given to analyze influence of loads and geometries on interacting SIFs. Research results show that when $\sigma_{x x}^{\infty} \geq \sigma_{y y}^{\infty}$, there appears a neutral crack orientation angle $\beta_0$ (without elliptical-hole's effect). Increasing $\sigma_{x x}^{\infty} / \sigma_{y y}^{\infty}$  and $b/a$ (close to circular-hole) usually decreases $\beta_0$ of $K_I$ and benefits to the layout of stop-holes. The surface compressive stresses applied onto elliptical-hole $(n)$ and crack $(p)$ have significant influence on interacting SIFs but almost no on $\beta_0$. Increasing $n$ and $p$ usually results in increase of interacting SIFs and facilitates crack propagation and fracture networks. The elliptical-hole orientation angle $(\alpha)$ and holed-cracked distance $(t)$ have great influence on the interacting SIFs while have little effect on $\beta_0$. The present method is not only simple (without any singular parts), high-accurate (due to exact fundamental stress solutions) and wider applicable (under far-field stresses and arbitrarily distributed surface stress) than the common methods, but also has the potential for the anisotropic problem involving multiple holes and cracks.

Wei Yi, Qiuhua Rao, Wei Zhu, Qingqing Shen, Zhuo Li & Wenbo Ma. (1970). Interacting Stress Intensity Factors of Multiple Elliptical-Holes and Cracks Under Far-Field and Arbitrary Surface Stresses. Advances in Applied Mathematics and Mechanics. 14 (1). 125-154. doi:10.4208/aamm.OA-2021-0057
Copy to clipboard
The citation has been copied to your clipboard