\documentclass[mathpazo]{jams}

%%%%% author macros %%%%%%%%%
% place your own macros HERE
%%%%% end %%%%%%%%%

\begin{document}
%%%%% title : short title may not be used but TITLE is required.
% \title{TITLE}
% \title[short title]{TITLE}
\title{A demonstration of the \LaTeXe \ class file for the
Journal of Atomic and Molecular Sciences}

%%%%% author(s) :
% single author:
% \author[name in running head]{AUTHOR\corrauth}
% [name in running head] is NOT OPTIONAL, it is a MUST.
% Use \corrauth to indicate the corresponding author.
% Use \email to provide email address of author.
% \footnote and \thanks are not used in the heading section.
% Another acknowlegments/support of grants, state in Acknowledgments section
% \section*{Acknowledgments}
\author[T.~Lam]{T.~Lam\corrauth}
\address{Author Address}
\email{{\tt jams@global-sci.org} (T.~Lam)}

% multiple authors:
% Note the use of \affil and \affilnum to link names and addresses.
% The author for correspondence is marked by \corrauth.
% use \emails to provide email addresses of authors
% e.g. below example has 3 authors, first author is also the corresponding
%      author, author 1 and 3 having the same address.
% \author[Zhang Z R et.~al.]{Zhengru Zhang\affil{1}\comma\corrauth,
%       Author Chan\affil{2}, and Author Zhao\affil{1}}
% \address{\affilnum{1}\ School of Mathematical Sciences,
%          Beijing Normal University,
%          Beijing 100875, China. \\
%           \affilnum{2}\ Department of Mathematics,
%           Hong Kong Baptist University, Hong Kong SAR}
% \emails{{\tt zhang@email} (Z.~Zhang), {\tt chan@email} (A.~Chan),
%          {\tt zhao@email} (A.~Zhao)}
% \footnote and \thanks are not used in the heading section.
% Another acknowlegments/support of grants, state in Acknowledgments section
% \section*{Acknowledgments}


%%%%% Begin Abstract %%%%%%%%%%%
\begin{abstract}
This paper describes the use of the \LaTeXe \ {\sf jams.cls} class file for
setting papers for the {\it Journal of Atomic and Molecular Sciences}.
\end{abstract}
%%%%% end %%%%%%%%%%%

%%%%% PACs/Keywords %%%%%%%%%%%
\pacs{PACS codes to be provided}
\keywords{\LaTeXe}

%%%% maketitle %%%%%
\maketitle


%%%% Start %%%%%%
\section{Introduction}
This paper is described how to use the {\sf jams.cls}\footnote{Current verions is 1.0. Please
ensure you use the most up to date class file, available from the
global-sci homepage at http://www.global-sci.org/jams.} class file for publication
in the {\it Journal of Atomic and Molecular Sciences}.
The {\sf jams.cls} class file preserves much of the standard \LaTeXe \ interface
so that authors can easily convert their standard \LaTeXe \ {\sf article} style
files to the {\sf jams} style.

\section{Preparation of manuscript}
The Title Page should contain the article title, authors' names and
complete affiliations, footnotes to the title, and the postal address for
manuscript correspondence (including e-mail address and fax numbers). The
Abstract should provide a brief summary of the main findings of the paper.
Immediately after the abstract, provide a maximum of 6 keywords. Be
sparing with abbreviations: only abbreviations firmly established in the
field may be eligible. Please provide up to 6 standard PACS codes. The
available codes may be accessed at PACS: http:/\!/www.aip.org/pacs or
http:/\!/publish.aps.org/pacs.




References should be cited in the text by a number in square brackets.
Literature cited should appear on a separate page at the end of the
article and should be styled and punctuated using standard abbreviations
for journals (please see http:/\!/www.cas.org/sent.html). For unpublished
lectures of symposia, include title of paper, name of sponsoring society
in full, and date. Give titles of unpublished reports with "(unpublished)"
following the reference. Only articles that have been published or are in
press should be included in the references. Unpublished results or
personal communications should be cited as such in the text. For example:
\begin{itemize}
\item[1)] For a journal:
\begin{itemize}
\item[[1\!\!]]  L. C. Cai, Q. F. Chen, Y. J. Gu, et al. J. At. Mol. Phys. 22 (2005)
43 (in Chinese).
\item[[2\!\!]] H. Kanamori, Science 279 (5359) (1998) 2063.
\end{itemize}
\item[2)] For a book:
\begin{itemize}
\item[[3\!\!]] W. Strunk, Jr. and E. B. White, The Elements of Style, third ed. (Macmillan, New York, 1979).
\item[[4\!\!]] M. Birgersson, Calculations of Clean and Adsorbate Covered Metal
Surfaces and Their Core-level Photoemission Spectra (Lund University, Sweden, 2002).
\end{itemize}
\item[3)] For a chapter in an edited book:
\begin{itemize}
\item[[5\!\!]] G. R. Mettam and L. B. Adams, How to prepare an electronic version of
your article, in: Introduction to the Electronic Age, eds B. S. Jones, R. Z. Smith (E-Publishing, Inc., New York, 1999) pp. 281.
\end{itemize}
\end{itemize}




Equations should be typewritten whenever possible and the number placed in
parentheses at the right margin. Reference to equations should use the
form ``Eq. (1)'' or simply ``(1)'' Superscripts and subscripts should be typed
or handwritten clearly above and below the line, respectively.


Figures should be in a finished form suitable for publication. Number
figures consecutively with Arabic numerals (for example Fig.\ 1). Lettering
on drawings should be of professional quality or generated by
high-resolution computer graphics and must be large enough to withstand
appropriate reduction for publication.Good quality figures have the
following characteristics. They should be produced in resolution of 600
dpi/in and have lines, letters, numbers and symbols of uniform strength
and contrast.The final thickness of a line in a figure usually lies within
the range 0.15-0.20 mm. Illustrations in color in most cases can be
accepted only if the authors defray the cost. At the Editor's discretion a
limited number of color figures each year of special interest will be
published at no cost to the author.


\section{Header information}
The heading for any file using {\sf jams.cls} is like this;
\begin{verbatim}

\documentclass[mathpazo]{jams}

\begin{document}

\title{Make the title in title case}

\author[An Author et.~al]{First Author\affil{1},
Second Author\affil{2}\comma\corrauth
\and Third Author\affil{1}}

\address{\affilnum{1}\ Address for first and third authors \\
\affilnum{2}\ Address for second author}

\emails{{\tt jams@global-sci.org} (A.~Author),
{\tt second@author.email} (S.~Author),
{\tt third@author.email} (T.~Author)}

\begin{abstract}
Text here, no equation, no citation, no reference.
\end{abstract}

\pacs{PACS codes to be provided}
\keywords{list here}

\maketitle

\section{First Section}

\end{document}

\end{verbatim}

\noindent {\bf Notes:}
\begin{enumerate}
\item Starting from volume two, we use package {\sf mathpazo}. If you do not have this package,
you just remove the option {\sf mathpazo} in $\backslash$documentclass.
We can make it for you in the printing version.
\item The first argument in square bracket of $\backslash$author is a MUST.
It is for the running heads.
$\backslash$corrauth should be provided to indicate the
corresponding author. $\backslash$email(s) is used to show that
author(s) email address(es) in footnote.
\item The abstract should be captable of standing by itself, in the
absence of the body of the article and of the bibliography. It is forced
to print within one page, so there may be problem if it is too long.
\item You may have your own macros but keep it to an absolute minimum.
\item $\backslash$thanks is not working in this style. You should use
$\backslash$section*\{Acknowlegments\} for acknowlegments/grant support as
the last section (just before references).
\end{enumerate}

\section{Some remarks}
\subsection{Mathematics}
{\sf jams.cls} makes the full functionality of \AmS\TeX \ available. We encourage
the use of the {\sf align}, {\sf gather} and {\sf multline} environments for displayed
mathematics.



\subsection{Cross-referencing}
The use of the \LaTeX cross-reference system for figures, tables, equations
and citations is encouraged.


%%%% Acknowledgments %%%%%%%%
\vspace{5mm}
\noindent{\bf Acknowledgments.}
The author would like to thank  ....

%%%% Bibliography  %%%%%%%%%%
\begin{thebibliography}{99}
\bibitem{Goossens} M. Goossens, F. Mittelbach, and A. Samarin, The LaTeX Companion (Addison-Wesley, Massachusetts, 1994).
\bibitem{Kopka}H. Kopka and P. W. Daly, A Guide to LaTeX (Addison-Wesley, Massachusetts, 1999).
\bibitem{Knuth}D. E. Knuth, The TeXbook (Addison-Wesley, Massachusetts, 1992).
\bibitem{Other}A. N. Other, Int. J. Numer. Meth. Engng. 15 (2000) 1.
\bibitem{Yin}Z. Yin, H. J. H. Clercx, and D. C. Montgomery, Comp. Fluids 33 (2004) 509.
\end{thebibliography}

\end{document}
